Metrology Technician

Gastonia,, NC
Full Time
Mid Level

Metrology Technician

Company: IFAB Corp.

Department: Quality

Job Type: Full-time

About IFAB Corp.

IFAB Corp. is a leading manufacturing company specializing in metal fabrication, assembly, and coating services. Our state-of-the-art plant houses cutting-edge equipment, including lasers and coil stamp machines. We take pride in our commitment to quality, safety, and operational excellence.

Position Summary

We are seeking a skilled Metrology Technician to join our Quality team. In this role, you will perform dimensional and visual inspections of automotive components using precision metrology equipment. You will ensure product compliance with engineering drawings, GD&T requirements, customer specifications, and IATF 16949 standards, supporting new product launches (PPAP) and ongoing production.

Key Responsibilities

  • Dimensional & Visual Inspection: Perform first-piece, in‑process, and final inspections using CMM, height gauges, calipers, micrometers, bore gauges, and optical comparators.

  • Blueprint & GD&T Interpretation: Read and interpret blueprints and GD&T symbols to determine measurement methods and acceptance criteria.

  • Metrology & CMM Support: Operate CMM equipment (Zeiss, Hexagon, Mitutoyo, etc.), load programs, verify alignments, and ensure accurate readings.

  • Documentation & PPAP: Complete dimensional reports, capability studies (Cp/Cpk), and non‑conformance reports. Support PPAP documentation (ISIR, MSA/Gauge R&R).

  • Calibration & Maintenance: Conduct routine calibration checks, maintain inspection equipment, and update calibration records per IATF 16949.

  • Production Support: Assist with root cause analysis (5‑Why, Fishbone) for non-conformances, verify corrective actions, and maintain 5S standards in inspection areas.

Requirements (What You Need to Succeed)

Minimum Qualifications:

  • Education: High school diploma or equivalent (Technical trade certificate or Associate degree preferred).

  • Experience: 2+ years of experience in automotive manufacturing inspection or metrology.

  • Technical Skills: Strong knowledge of GD&T and blueprint reading.

  • Equipment Mastery: Hands-on experience with CMM (operator level minimum), height gauges, micrometers, calipers, and bore gauges.

  • Quality Standards: Familiarity with IATF 16949, APQP, PPAP, and SPC fundamentals.

  • Core Competencies: High attention to detail, analytical mindset, and ability to perform Gauge R&R (MSA) studies.

Preferred Qualifications (A Plus):

  • Experience with metal-mechanic automotive parts (stamping, welding, machining).

  • CMM programming knowledge (PC-DMIS, Calypso, MCOSMOS).

  • Experience with portable CMM arms (FARO, Hexagon) or laser scanning.

  • Familiarity with OEM customer-specific requirements (GM, Ford, Stellantis, Toyota, etc.).

  • Bilingual (English/Spanish).

Physical Demands & Work Environment

  • Split time between the quality lab and the manufacturing floor (exposure to stamping presses, welding cells, etc.).

  • Ability to stand/walk on the shop floor and lift up to 35 lbs occasionally.

  • Occasional travel to customers/suppliers (10–20%).

Share

Apply for this position

Required*
We've received your resume. Click here to update it.
Attach resume or Paste resume
Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file

To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.
Invitation for Job Applicants to Self-Identify as a U.S. Veteran
  • A “disabled veteran” is one of the following:
    • a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
    • a person who was discharged or released from active duty because of a service-connected disability.
  • A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
  • An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
  • An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Veteran status


Voluntary Self-Identification of Disability
Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 05/31/2026
Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury
Please check one of the boxes below:

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

You must enter your name and date
Human Check*