Manufacturing Engineer

Gastonia,, NC
Full Time
Experienced

Manufacturing Engineer

Location: Gastonia, NC (IFAB Corp — On-site)

Job Type: Full-Time 

About the Role

At IFAB Corp, the Manufacturing Engineer is the technical owner of how parts are made. In this role, you will design, document, and continuously improve our fabrication and assembly processes—stamping, forming, welding, CNC machining, assembly, and coating—to ensure production runs to standard with predictable cycle times, yield, and costs.

If you thrive in a hands-on shop-floor environment where your engineering background directly drives plant productivity, quality, and process capability, this role is for you.

Key Responsibilities

  • Process Engineering & Documentation: Develop and maintain manufacturing routings, operation sequences, standard times, and Bills of Materials (BOMs) within our ERP environment (Sage 500). Author and control work instructions, setup sheets, and visual standards.

  • Tooling & Fixturing: Design fixturing and workholding using 3D CAD (SolidWorks/AutoCAD), coordinate build or purchase, and validate capability through first-article runs.

  • Process Optimization & Productivity: Identify and eliminate key cost drivers, reduce setup times (SMED), implement Lean Manufacturing techniques, and improve overall equipment effectiveness (OEE).

  • Quality & Root-Cause Problem Solving: Lead process-side root-cause analysis (8D, 5-Why, Fishbone) to reduce scrap and rework. Support APQP/PPAP deliverables (PFMEA, Control Plans, Run-at-Rate).

  • NPI & Engineering Changes (ECO): Provide Design for Manufacturability (DFM) feedback on new parts and execute engineering changes smoothly on the production floor without operational disruptions.

  • Safety & Compliance: Ensure processes, guarding, ergonomics, and material handling meet plant safety standards and satisfy ISO 9001 / IATF 16949 audit requirements.

Required Qualifications

  • Education: Bachelor’s degree in Manufacturing, Mechanical, Industrial, or Welding Engineering (or an Associate degree combined with 6+ years of hands-on manufacturing engineering experience).

  • Experience: 3+ years of manufacturing engineering experience in metal fabrication, stamping, welding, CNC machining, or assembly.

  • Technical Skills:

    • Strong proficiency interpreting blueprints, GD&T, and welding symbols.

    • Proficiency in 3D CAD software (SolidWorks, Inventor, or AutoCAD).

    • Hands-on experience working with ERP systems (routings, work centers, BOMs).

    • Structured problem-solving discipline (8D, 5-Why, Fishbone).

  • Shop-Floor Presence: Comfortable spending the majority of the working day on the production floor working directly with operators and supervisors.

Preferred Qualifications

  • Language: Bilingual English/Spanish — strongly preferred for direct communication with the shop-floor workforce.

  • Experience across multiple fabrication processes within one facility (press brake, laser/plasma cutting, robotic and manual welding, CNC machining, paint/coating).

  • Lean Manufacturing or Six Sigma Certification (Green Belt or above).

  • Automotive or heavy-truck supply chain experience operating within an IATF 16949 / ISO 9001 quality system.

  • Robotic welding or automation programming and integration experience.

  • Specific experience with Sage 500 ERP.

  • CWI or weld process qualification background (AWS D1.1 / D1.3).

Core Competencies

  • Technical Credibility: Earns operator and supervisor trust by solving floor-level issues through collaboration.

  • Data-Driven Decision Making: Quantifies results before and after project execution to validate cost savings and cycle time improvements.

  • End-to-End Ownership: Stays with process modifications until they run reliably to standard on the floor.

What We Offer

  • Competitive salary and comprehensive benefits package.

  • Growth opportunities within a dynamic manufacturing operations environment.

  • Collaborative culture focused on continuous improvement and operational excellence.

Share

Apply for this position

Required*
We've received your resume. Click here to update it.
Attach resume or Paste resume
Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file

To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.
Invitation for Job Applicants to Self-Identify as a U.S. Veteran
  • A “disabled veteran” is one of the following:
    • a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
    • a person who was discharged or released from active duty because of a service-connected disability.
  • A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
  • An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
  • An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Veteran status


Voluntary Self-Identification of Disability
Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 07/31/2029
Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury
Please check one of the boxes below:

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

You must enter your name and date
Human Check*